Victron SmartSolar MPPT Solar Charge Controller
Shipping calculated at checkout
Only 1 in stock
- Bluetooth Smart built-in The wireless solution to set-up, monitor, update and synchronise SmartSolar Charge Controllers.
- VE.Direct For a wired data connection to a Color Control GX, other GX products, PC or other devices
- Ultra-fast Maximum Power Point Tracking (MPPT) Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers.
- Load output Over-discharge of the battery can be prevented by connecting all loads to the load output. The load output will disconnect the load when the battery has been discharged to a pre-set voltage (48V model: interface with a relay). Alternatively, an intelligent battery management algorithm can be chosen: see Battery Life. The load output is short circuit proof.
- Battery Life: intelligent battery management When a solar charge controller is not able to recharge the battery to its full capacity within one day, the result is often that the battery will continually be cycled between a ‘partially charged’ state and the ‘end of discharge’ state. This mode of operation (no regular full recharge) will destroy a lead-acid battery within weeks or months. The Battery Life algorithm will monitor the state of charge of the battery and, if needed, day by day slightly increase the load disconnect level (i.e. disconnect the load earlier) until the harvested solar energy is sufficient to recharge the battery to nearly the full 100%. From that point onwards, the load disconnect level will be modulated so that a nearly 100% recharge is achieved about once every week.
- Programmable battery charge algorithm See the software section on our website for details
- Day/night timing and light dimming option See the software section on our website for details
- Internal temperature sensor Compensates absorption and float charge voltage for temperature.
- Optional external battery voltage and temperature sensing via Bluetooth A Smart Battery Sense or a BMV-712 Smart Battery Monitor can be used to communicate battery voltage and temperature to one or more SmartSolar Charge Controllers
Key Features
Installation Information
Testimonials
Absolutely stunning, from the shipping and delivery to the impeccable packaging and identification of the parts. I installed in about ten minutes with the video which was linked to my phone via the QR code included in the kit.. Can't say enough about the fit and finish of this kit. Very reasonable price too when you consider all of the extras.
David L.
Hood Strut Kit Review
The mounting system works great. I originally installed my MaxxAir fan with sheet metal screws but opted to replace it with with this and glad I did.
Michael O.
MaxxFan Interior Mounting Kit
Star Rating5 out of 5 starsDescriptionVery well built, the fact that the harness came with everything you need for a clean and easy look and install deserves more than five stars. Thank you!
Lulian T.
Sprinter Horn Upgrade Kit Reivew
