Skip to content
  1. We're adding new products & restocking the essentials every month!!
Sprinter 144 Rocker Lockers
Sprinter 144 Rocker Lockers
Sprinter 144 Rocker Lockers
Sprinter 144 Rocker Lockers

Moonraker Design Co.

Sprinter 144 Rocker Lockers

Sale price $389.00

Shipping calculated at checkout

Out of stock

Demand for this product has been quite high and we are a very small operation, please allow about 1 week for this to ship right now.  We are working hard to stabilize this product!

*Back in stock around mid-September

Take advantage of this dead space in your van and create a nice little storage solution! 

The Moonraker Design Co. Rocker Lockers or Quarter Cubbies are sold as a pair for left and right side of the van.  We focused on a super clean and understated rear rocker locker for the Sprinter 144 giving you an OEM fit and finish.  Coated in textured powdercoat this looks great with the factory plastic as well as if you were to Rhino line the bottom half of your vehicle.   This adds additional storage to the rear of the van for things like hoses, dog leashes, recovery gear, jumper cables, shore power cables etc.

** Please note, installation requires serious cutting and drilling of your van. If you are not confident about this detail, professional installation is recommended.

** These Rocker Lockers are only for 2019+ VS30 144 Sprinter Vans.  If you are unsure of fitment please reach out before you purchase. 

Key Features

  • Priced per set, you get a drivers and passengers side Rocker Locker.
  • Powder coated in crinkle black and made from 5052 Aluminum for a durable and attractive look that looks great on the factory paint as well as a rhino lined or wrapped lower half.
  • We also designed the rocker locker to be free of HW you won’t see any screw heads or bolts from the exterior of the box.
  • Quality sealed cam clamping locking latches from SouthCo
  • Heavy duty die cast hinges
  • The interior trim pieces is powder coated matte black as well for a completely finished look

Installation Information

** These Rocker Lockers are only for 2019+ VS30 Sprinter Vans.

Please note, while the box is sealed from the outside with a neoprene gasket, there are factory weep holes that small amount of water could penetrate through while driving in very we conditions. Nothing is going to get soaked, but we wouldn’t rely on this space for sensitive electronics or valuables during these conditions.

For installation information, please visit our resources page.

Customer Reviews

Based on 4 reviews
75%
(3)
25%
(1)
0%
(0)
0%
(0)
0%
(0)
J
JT
Install complete

It’s not easy cutting into a new and perfectly good van with only 10,000 miles on it and maybe that’s why my rocker lockers sat in the box they came in for 2 months. But nothing ventured, nothing gained as they say.

My mechanical aptitude is only modest at best but I found this project to go easier than expected. After watching the video and reading install tips from the website, I proceeded carefully and with due diligence and the install went quite smoothly. All components were of the highest quality and carefully packaged for shipping. The provided template was key in getting everything lined up perfectly.

I appreciate the minimalist approach to the Moonraker Designs Rocker Lockers. The simplicity and modesty of their outward appearance is refreshing, not overbearing or needlessly busy in presentation. And who couldn’t use an extra storage cubby for a spare liter of motor oil or whatever else you might want to stash inside?

Thank you Moonraker Design for another great product.

User picture User picture
R
Ross
Top notch product, great service

Installed my rocker locker this weekend - really great product and well built. The cardboard templates made it easy to place and install. Tight tolerances, but everything came together great. Thanks!

User picture
W
William Hobbins
Tits

Haven’t installed them yet. Likely another month or two before the weather is stable but appearance and material quality is beautiful.

N
Nic T
Rocker My Locker

Slick. Easy install, only tough part is the top corner nut but that’s clearly explained.

Looks clean, quality components and support from Todd is top notch. Best you can buy.

User picture User picture

Testimonials

Absolutely stunning, from the shipping and delivery to the impeccable packaging and identification of the parts. I installed in about ten minutes with the video which was linked to my phone via the QR code included in the kit.. Can't say enough about the fit and finish of this kit. Very reasonable price too when you consider all of the extras.

David L.

Hood Strut Kit Review

The mounting system works great. I originally installed my MaxxAir fan with sheet metal screws but opted to replace it with with this and glad I did.

Michael O.

MaxxFan Interior Mounting Kit

Star Rating5 out of 5 starsDescriptionVery well built, the fact that the harness came with everything you need for a clean and easy look and install deserves more than five stars. Thank you!

Lulian T.

Sprinter Horn Upgrade Kit Reivew